• Online only
  • On sale!
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid
Professional pen tester to measure the wear of car brake fluid

Professional pen tester to measure the wear of car brake fluid on led

Designed for brake quality control by checking if the quality is ok. This test measures the humidity present in the brake fluid of your car, indicating whether the liquid is ok or needs replacing, the value is indicated by 5 easy to read LEDs. Small and light to carry for greater comfort, really u/ Span>n excellent help for your journey.The quality is tested and indicated on five LEDs in terms of "percentage of water in the brake fluid". b hold a few seconds to know the resultsCalibrated for cars with DOT 4 brake fluid.Suitable for DOT 3 / DOT 4 testingBattery included

€9.95
Tax included

Quantity Unit discount You Save
2 20% €3.98
3 25% €7.46
5 30% €14.93
 
INSTRUCTIONS
After inserting the 1.5V mini-stylus battery, turn on the brake fluid tester by pressing the button on the top of the tester (pen type). The green LED will light up. Unscrew the cover for the brake fluid reservoir and remove the cap. Immerse the tester probes in the brake fluid. The display will indicate the percentage of water in the brake fluid. At the end of the test, remember to screw the brake fluid reservoir cap back on. The tester automatically switches off after 12 seconds of inactivity

TIPS AND MAINTENANCE
The battery must be replaced if, by pressing the button to switch it on, the green LED does not light up. The tester probes must be washed with running water and dried with a clean cloth after each use. Immediately screw the tank cap back on after performing the test

DISPLAY LED INDICATORS
The tester SPIES indicate the percentage of water in the brake fluid:
Green light: there is no water in the brake fluid;
Green / Yellow: less than 1%;
Green / Yellow / Yellow: about 2% water;
Green / Yellow / Yellow / Red: about 3% (liquid replacement is recommended);
Green / Yellow / Yellow / Red / Red: at least 4% (theliquid must be replaced immediately)
CONTENT OF THE PACKAGE

n. 1 tester for brake fluid quality evaluation

Caution
Replace the battery if the green LED no longer lights up after pressing the power button.
Wash the test probe with running water after each use.
In case of contact with skin with brake fluid, wash contaminated skin or clothing thoroughly with water.
Do not expose the brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic!
851034
Comments (0)

16 other products in the same category:

Product added to wishlist