Polyester masking tape with silicone adhesive – 66 m, 85 µm

Specifically developed for paint masks, easy to cut, thanks to its transparency allows an accurate positioning.

After painting it can be removed without leaving traces of adhesive, non-printable. Thickness 0,06 mm, used to sand glass or spray paints, it has a good holding, easy to remove.

Ideal for masking and shielding at high temperatures, resists up to 400 °C (for short periods) and at low temperatures up to -50 °C .

When good adhesion to superficial surfaces is required, the response is silicone tapes

Fields of application:

• Bodywork applications.
• Dye and powder coating and liquid.
• Electrostatics for liquid immersion.
• Galvanic treatments, anodizing, inflammation.
• Used as a temporary roll closure, it allows removal without breaking the roll material.
• Stratification of the glass.

Although being a very cheap product, this siliconic masking tape must have specific properties to avoid that paint thinners could affect the sticker and curling it. The product could be applied at wet or dry approach. Suitable for spraying, roller and airbrush.

Silicon substrates such as resin-bonded papers or films can be glued or joined with silicone tapes.