Shopping Cart
- Online only
This film will protect your vehicle by scratches and abrasions, thanks to its machinability it is also possible to cover bent, curved and contoured surfaces.
Made with a special microcanalized Air Free System that does not create air bubbles during application. This makes easy and fast the application, the film can also be removed several times before it is taken on the surface.
Thermoformable, the film can also be applied on curved, riveted, shaped and moderately bunched surfaces; it will become more elastic and extensible if carefully heated, e.g. with a hair dryer or a heat gun.
Maximum resistance against all atmospheric agents.
Adaptable to any object, it models easily does not leave any residue of glue.
Used especially for Car Wrapping.
The film can also be used inside the vehicle for internal handles, center consoles and dashboards or outside the vehicle for applications such as mirrors, exterior skirts, wheel arches, bonnets and bumpers.
INSTRUCTIONS FOR APPLICATION:
• Before starting product application, thoroughly wash and clean the contact surfaces using a clean cloth and denatured alcohol to remove any traces of dirt.
• Apply a cutter and cut the film at least 10 cm perimetrically larger than the board to cover.
• Remove the film under the adhesive.
• Use a spatula to stretch the film, starting from the center outwards to get the air out from below the adhesive.
• With a heat gun, heat the film to soften it and adapt it better to the shape of the surface, always continue with the spatula with the gun until the adhesive has taken the desired shape.
• Use the cutter to cut around the surface, then finish the edges with the spatula and check for the last tweaks.
• Work is completed, before washing your car wait at least one day in most that the film is firmly fixed to the surface.
