Solvent-based single-component professional varnish for photoluminescent signage

For the best luminescent effect, the surfaces to be treated must be of a light color or have a reflective effect.

Professional product, upon request we can send the technical data sheet and the safety data sheet.

NOT IMPORTED, MADE IN ITALY

This paint also works perfectly with UV lights or WOOD lamps. Single-component paint with very fast drying and photoluminescent effect, designed for application on surfaces meant to be highlighted for a prolonged period of time in poor lighting conditions.

For best performance, it must be applied on a white or light-colored base and remain exposed to natural or artificial light for a period ranging from 5 to 30 minutes depending on the light source. For optimal surface preparation before application, thorough degreasing with a suitable solvent or detergent is recommended. The paint can be used on glass, wood, iron, metal, plastic, or concrete substrates.

The product can be applied with a brush due to its thick consistency but can also be used with a spray gun or airbrush, with a dilution in nitro thinner of 15%-20% to make it more fluid.

Avoid contact with eyes and skin and apply in ventilated areas, the product is not radioactive. The duration of the photoluminescent effect depends on the following factors: good exposure to natural and artificial light and application in areas free of light pollution.

For a thickness of about 3mm, it covers 6sqm/kg.