Non-slip rubber mat anti-vibration noise reduction for washing machine and dryer, cuttable

Anti-vibration recycled rubber mat for washing machines & dryers — non-slip, noise-reducing, cut-to-size

Professional slab in recycled rubber bonded with PUR elastomer, made in Italy, designed to stabilise washing machines and dryers, reduce vibration and noise and protect floors. Single slab size: 60 × 60 × 0.8 cm. The granular, high-grip surface prevents the appliance from “walking” during spin cycles.

Why it matters (real benefits)

• Stops walking washers: higher friction and mechanical decoupling from the floor.
• Less noise and less vibration for you (and for neighbours below).
• Floor protection: avoids scuffing, scratches and micro-impacts.
• Cut-to-size with a utility knife for tight spaces or non-standard bases.
• Durable: continuous service from −30 °C to +100 °C.
• Multi-purpose: under dryers, dishwashers, fitness gear, speakers/subwoofers, workbenches.

How it works

The granular rubber mat damps micro-oscillations typical of spin cycles and increases friction between the appliance and the floor, limiting resonance, structure-borne vibration and annoying noise.

Where to use

• Washing machines & dryers (front loaders or top loaders).
• Dishwashers and large appliances.
• Home gym: under bikes, rowers, benches and treadmills.
• Hi-Fi and subwoofers to attenuate floor-borne vibration.
• Professional use: as a non-slip and protective layer in transport/packaging.

Installation (step-by-step)

1. Level the machine: adjust the feet until wobble is gone. The mat doesn’t replace proper levelling.
2. Clean the area: dry, dust- and grease-free floor.
3. Full-footprint placement: place the entire slab under the appliance base.
4. Cutting (if needed): mark and trim with a knife and straightedge. Avoid small patches only under feet.
5. Verify during the first spin: the machine should remain stable and quieter.

Technical data (summary)

Pro tips (for best results)

• Heavy loads / strong vibration? Combine with proper foot levelling and, if needed, anti-vibration feet.
• Delicate floors (parquet, LVT): check compatibility; add a protective film if required by the floor maker.
• Care: vacuum/wipe with a damp cloth; avoid harsh solvents.

At a glance

• Reduces vibration/noise and stops walking.
• Protects floors and stabilises spin cycles.
• Cut-to-size, durable, reusable — simple and effective.

FAQ

Yes, top and front loaders. The 60 × 60 cm slab fits most bases; check your footprint.

For moving machines, a full-footprint mat offers greater grip; feet help with point vibrations.

Yes, with a knife and straightedge. Keep clean edges to maintain grip.

Yes. PUR-bonded recycled rubber suits home use; wipe any water trapped under the unit.

Note: technical values are indicative and do not replace the official data sheet; performance depends on load, floor and proper levelling.