Carbon Fiber 6D High‑Gloss Car Wrap – 152 cm Width – Air‑Release, Bubble‑Free
Instantly upgrade the look of your car or motorbike (interior/exterior) with our 6D high‑gloss carbon fiber wrap: mirror‑like finish with real depth, air‑release channels for a bubble‑free install, and a pressure‑activated adhesive that is repositionable and removable on sound paint. The professional 152 cm width (approx. 60") minimizes seams on bonnets, roofs and doors.
Why choose it
- 6D Hi‑Gloss effect: wet‑look depth and realistic weave; not a flat printed pattern.
- Air‑Release / No‑Bubble: micro‑channels vent trapped air while squeegeeing.
- Repositionable & removable: lift and re‑apply during install; clean removal on healthy paint.
- Ultra‑conformable: with moderate heat (heat gun) it shapes over light/medium curves and recesses.
- Durable: indoor/outdoor, UV‑resistant; resists water, dirt, grease, salt, mild acids and oil; easy water clean.
- 152 cm width: the go‑to “60 inch” format for large panels, reducing joins.
Recommended applications
- Exterior: bonnet/hood, roof, pillars, mirrors, spoilers, side skirts; trim blackout.
- Interior: dash, console, rigid trims, door panels.
- Motorbikes: fairings and rigid parts (clean, smooth substrates).
- Decor & protective: plotter‑cut decals, logos and accessories.
Quick install guide
- Prep: smooth, degreased, wax/silicone‑free surface; completely dry.
- Dry position: lay, lift and re‑position if needed; work in a clean area.
- Squeegee center‑out with a felt squeegee; the micro‑channels vent the air.
- Curves/recesses: apply moderate heat and form gently without overstretching.
- Edges: trim with a sharp blade; consider edge primer on critical profiles.
Technical specifications
| Finish |
6D high‑gloss (mirror look with visual depth) |
| Weave |
4D‑style optical relief with gloss clearcoat (not a flat print) |
| Adhesive |
Pressure‑activated, air‑release (repositionable; clean removal on sound paint) |
| Conformability |
High with controlled heat (heat gun) |
| Resistance |
Indoor/outdoor, UV‑resistant, water‑repellent; water‑washable |
| Format |
152 cm width; multiple units supplied as continuous length whenever possible |
| Substrates |
Rigid, smooth surfaces (bodywork, painted plastics, panels) |
| Plotter |
Suitable for plotter cutting (decals/logos) |
| Protection |
Comes with a protective cap film to remove after installation |
Pro tips & notes
- Keep surfaces and environment dust‑free to maximize the no‑bubble result.
- On fresh resprays, wait full cure before wrapping.
- Longevity depends on UV exposure/climate/care; avoid harsh chemicals.
FAQ
Will it bubble?
The air‑release channels help evacuate air during squeegeeing when installed correctly.
Do I need heat?
Flat areas: often no. Curves/recesses: recommended for a clean conform.
Removable without residue?
Yes—repositionable & removable on sound paint; warm slightly and peel slowly.
Ready for a high‑gloss carbon look? Choose your length (multi‑units ship as continuous rolls) and wrap like a pro.
6D carbon fiber wrap, high gloss carbon vinyl 152 cm, air release bubble free, removable repositionable adhesive, UV resistant car wrap, carbon weave mirror finish, plotter cut vinyl, hood roof mirror caps wrap
