This category groups the main products for signage, visibility and electrical connections for trucks and trailers, with dedicated sections for each specific use.
Always check the product page for size, material, compatibility, stated approval or class, and intended application.
ECE 70.01 regulates the use of retro-reflective panels for heavy vehicles. Panels for the tractor unit are shorter (about 565 x 130 mm), while those for trailers are taller (565 x 195 mm or 1130 x 130 mm). Self-adhesive PVC models are recommended for smooth surfaces; panels with aluminum backing provide greater rigidity and durability. Both use class 3 reflective films and must be installed according to ministerial specifications.
ECE 70.01 covers retro-reflective red/yellow striped panels to be applied to the rear of tractor units and trailers. ECE 104 refers to 50 mm adhesive reflective tapes used to outline vehicle profiles: available in yellow, red or white and applied on the sides and rear to improve night-time visibility.
Speed limit discs with 200 mm diameter are mandatory on industrial vehicles and indicate the maximum permitted speed; they must be applied in pairs on the rear. Oversize load panels, 50 x 50 cm, are mandatory when the load protrudes more than 30 percent of the vehicle length. Both must be retro-reflective and mounted on a clean, dry surface.
Exceptional transport concerns loads exceeding ordinary dimensions or weights. In such cases, “exceptional transport” panels with approved reflective film are required, available in sizes such as 600 x 150 mm or 1200 x 150 mm. Their installation is regulated by the Ministerial Decree 30/01/1985 and subsequent updates.
For the transport of dangerous goods, square labels of about 300 x 300 mm identifying the hazard class (gases, flammable liquids, infectious substances, etc.) are required, together with orange panels of about 400 x 300 mm with UN and Kemler numbers. It is important to check the class and UN number of the goods to select the correct combination of labels and panels.
Spiral EBS or ABS cables are 24 V electrical connectors linking the tractor unit to the trailer and transmitting electronic braking system signals; they can be 7- or 15-pin and comply with ISO standards. Air coils are flexible hoses for compressed air in pneumatic brakes. Do not confuse the two systems: one is electrical, the other pneumatic.
ECE 104 tapes are mandatory on commercial vehicles over 7.5 tonnes GVW and on trailers over 3.5 tonnes. On light vehicles and vans they are optional but recommended to increase visibility. The 50 mm tapes should be applied in yellow or white on the sides and red on the rear.
“Blind spot” panels are mandatory in France for trucks and buses over 3.5 tonnes. They warn motorcyclists and pedestrians about the vehicle’s blind spots. They are available as adhesive or rigid panels and must be positioned according to French regulations; vehicles regularly circulating in France are advised to install them.
Industrial reflective tapes not approved for use on vehicles are available in another section of the site dedicated to general marking. They are ideal for packaging, warehouses or construction sites, but do not meet ECE requirements for road circulation.
