Anti-condensation pipe insulation sleeve in 9 mm PE foam – Ø13/32 mm, 1.7 m

Anti-condensation pipe insulation sleeve in expanded PE foam

This pipe insulation sleeve is made of closed-cell expanded polyethylene (PE) foam. It is a lightweight, flexible solution for pipe insulation, helping to limit condensation and heat loss. The product is black, non-adhesive and has a longitudinal slit to make installation easier.

What it is

It is a 1.7 m pipe insulation sleeve, available with an inner diameter of Ø13 mm or Ø32 mm and an insulation thickness of 9 mm. The stated diameters are internal: measure the outer diameter of the pipe before buying and choose the compatible size.

Insulation and anti-condensation function

Closed-cell PE foam forms an insulating layer around the pipe and helps manage the temperature difference between the pipe and its surroundings. Actual performance depends on the pipe, temperature, humidity and installation, so compatibility must be checked for the system.

Applications: water, heating and air-conditioning

• Pipe insulation for hot and cold water when the diameter and operating conditions are compatible.
• Pipe insulation and thermal lagging for heating lines, subject to a technical compatibility check.
• Pipe insulation for air-conditioning and climate-control lines, including lines associated with heat pumps, when technically compatible.
• For outdoor use, protect the sleeve with trunking or another covering suitable for exposure. UV and weather resistance are not stated because these values are not documented in the available product information.

How to choose Ø13 mm or Ø32 mm

Measure the outer diameter of the pipe, not an existing sleeve. Choose Ø13 mm when the pipe is compatible with an inner diameter of about 13 mm; choose Ø32 mm when it is compatible with an inner diameter of about 32 mm. If in doubt, send us the pipe measurement and intended use before ordering.

Available specifications

For installers, maintenance technicians and B2B supplies

The sleeve is suitable for private users, plumbing and heating installers, maintenance technicians, contractors and companies that need to insulate pipes during installation or maintenance work. For projects, scheduled maintenance or multiple-unit purchases, we can check availability, alternative sizes and quantities.

Installation

1. Check the pipe diameter and compatibility; clean and dry the surface.
2. Cut the sleeve to the required length with scissors or a cutter.
3. Open the longitudinal slit and wrap the sleeve around the pipe.
4. Close and secure the slit with insulating tape or cable ties. Outdoors, add suitable protection.

Frequently asked questions

How do I choose between Ø13 mm and Ø32 mm?

Ø13 mm and Ø32 mm indicate the sleeve's inner diameters. Compare them with the pipe's outer diameter and choose the compatible size.

What is the sleeve thickness?

The stated insulation thickness for this product is 9 mm.

Is it suitable for hot and cold water?

It can be used on hot or cold water pipes when the diameter, temperature and system conditions are technically compatible. No numerical maximum-temperature value is published.

Can I use it for heating?

Yes, for compatible heating pipe sections; for unusual systems, a professional check is advisable.

Is it suitable for climate-control or air-conditioning systems?

It is intended for climate-control or air-conditioning pipes when the application and operating conditions are compatible. Always check the line type before installation.

Can it be used outdoors?

Outdoor sections must be protected with trunking or a covering. UV and weather resistance are not documented and therefore are not guaranteed.

Is it self-adhesive?

No. It is non-adhesive and has a longitudinal slit; close it with insulating tape or cable ties.

Do you have other sizes or larger quantities?

Need another size or larger quantities? Contact us: we can check availability and solutions for specific requirements.