Your cart
There are no more items in your cart
- Online only
- Sleeve made of flexible PVC for cylinder coating. The sleeve is air-fitted and therefore its diameter is always intended as the nominal diameter and refers to the size of the tube to be covered. The actual size is always smaller to allow better adhesion to the mandrel after being air-fitted. To facilitate the insertion of the head, it can be heated with hot water, thus softening the material before use.
- Good chemical resistance typical of PVC materials.
- Compliant with Directive 2002/95/EC (RoHS) 2003/11/EC.
- Operating temperature -5 °C to +50 °C.
Applications: general cylinder coatings, roller conveyors, rods on panel trolleys.
Available in 18mm or 20mm diameter x 20 meters length, other sizes and technical data sheet available on request.
Yellow flexible PVC air sleeve for cylinder covering – Ø 18 mm × 20 m
Technical sleeve in flexible PVC, yellow, designed for the covering and protection of cylinders, rollers, bars and tubes. Its section is slightly flattened to make air fitting easier and provide uniform contact along the surface.
Flexible PVC sleeve for covering cylinders, rollers and shafts; air application with high adhesion after fitting.
Typical uses
- Covering rollers and mandrels on handling machinery.
- Protection from friction and surface impacts on rods, handrails and supports.
- Reduction of contact noise and improved grip on smooth surfaces.
- Visual identification thanks to the high-visibility yellow colour.
Main features
- Material: flexible PVC.
- Colour: yellow.
- Nominal diameter: Ø 18 mm (page selection); check compatibility with your cylinder.
- Roll length: 20 metres (product-sheet indication).
- Finish: slightly flattened sleeve for easier insertion and grip.
Benefits
- Fast fitting: it is fitted by air over the component without structural adhesives.
- Flexibility: accommodates small dimensional tolerances and thermal expansion.
- Protection: helps limit scratches and superficial marks on covered parts.
- Simple maintenance: clean with non-abrasive neutral detergents.
Fitting instructions
- Measure: check the actual cylinder diameter and permitted tolerance.
- Prepare: clean and degrease the surface with isopropyl alcohol or a non-oily cleaner, then dry it.
- Optional fitting aid: warm the sleeve in lukewarm water to temporarily increase softness.
- Insert: start fitting and move along the cylinder with constant pressure, avoiding twists.
- Set: trim excess with a new blade and allow the sleeve to cool/set before use.
Warnings
- It does not compensate for large tolerances or major ovality: measure accurately before purchase.
- Avoid strong solvents, silicone oils and aggressive cleaners, which can shorten PVC service life.
- Performance and durability depend on operating conditions, including loads, temperature, chemicals and UV radiation.
900506
8058951951591
